Product ID:2-101200-2 (30903860) FIREX CARTRIDGE
MSDS Date:03/16/1994
FSC:1377
NIIN:01-255-2382
MSDS Number: BWXVY

PACIFIC SCIENTIFIC - ENERGY SYSTEMS DIV

7073 W WILLIS DR
CHANDLER, AZ 85226-5111
US

Emergency Phone: 602-796-1100

Info Phone: 602-796-1100

Preparer: JOEL GEVING

Cage: 54181

PACIFIC SCIENTIFIC CO.,HTL ENERGY SYSTEMS DIV.

5002 CHANDLER, AZ 85226 US

Telephone: 602-796-1100

Cage: 54181

LEAD AZIDE

CAS: 13424-46-9

RTECS: OF8650000

Fraction By Weight: <1%

OSHA PEL 0.05 MG/CUM

ACGIH TLV: 0.15 MG/CUM

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: <10%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

POTASSIUM PERCHLORATE

CAS: 7778-74-7

RTECS: SC9700000

Fraction By Weight: <1%

ACGIH TLV: 15 MG/CUM (RESP DUST

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: <0.1%

OSHA PEL 2.5 MG/CUM

ACGIH TLV: 2 MG/CUM RESP IC

1,1-DIFLUOROETHENE, TETRAFLUOROETHENE,

CAS: 25190-89-0

Fraction By Weight: <0.1%

OSHA PEL 15 MG/CUM (RESP DUST

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE TO IGNITION BY-PRODUCTS MAY
CAUSE EYE, SKIN & RESPIRATORY IRRITATION. SOME INGREDIENTS ARE
HIGHLY POISONOUS BY INGESTION. LEAD AZIDE IS HIGHLY TOXIC,
INTERFERING W/CELLULAR OXIDATIVE METABOLI SM. OVEREXPOSURE TO LEAD
MAY CAUSE ADVERSE EFFECTS TO BLOOD FORMING,
NERVOUS/URINARY/REPRODUCTIVE SYSTEMS & EMBRYOTOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IGNITION BY-PRODUCTS: IRRITATION. LEAD AZIDE:
NAUSEA, HEADACHE, WEAKNESS, SEVERE HYPOTENSION. LEAD: LOSS OF
APPETITE, ANEMIA, DISTURBANCES OF SLEEP, FATIGUE.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO IGNITION
BY-PRODUCTS: PRE-EXISTING PULMONARY DISEASES SUCH AS EMPHYSEMA &
ASTHMA.

First Aid:EYES: IF EXPOSED TO CONTAINER FRAGMENTATION, BANDAGE EYES &
TRANSPORT. IF EXPOSED TO IGNITION BYPRODUCTS, FLUSH W/WATER FOR 15
MINS. SKIN: WASH OF ANY RESIDUE W/SOAP & WARM WATER. INHALATION:
REMOVE T OF FRESH AIR. GIVE CPR/OXYGEN IF NECESSARY. OBTAIN MEDICAL
ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: SUPPORTIVE CARE.
TREATMENT BASED ON JUDGEMENT OF PHYSICIAN IN RESPONSE TO REACTIONS
OF PATIENT.

Extinguishing Media:PERMANENTLY INSTALLED, AUTOMATIC WATER
SPRINKLER/DELUGE SYSTEM RECOMMENDED
Fire Fighting Procedures:DON'T ATTEMPT TO MANUALLY FIGHT FIRES. IN CASE
OF FIRE, EVACUATE AREA, USING AS MUCH PROTECTIVE COVER & ACTIVATE
DELUGE & ALARM SYSTEMS.
Unusual Fire/Explosion Hazard:EXPLOSIVE, SENSITIVE, MUST NOT BE
CONFINED IF BURNING. MAY DEFLAGRATE/DETONATE IF EXPOSED RELEASING
HEAT/TOXIC GASES/SHOOCK WAVES. AUTOIGNITION TEMP: 500F.

Spill Release Procedures:SMALL: BARRICADE AREA, ELIMINATE IGNITION
SOURCES. USE A SOFT BRISTLE BRUSH & CONDUCTIVE RUBBER PAN/RUBBER
SHOVEL TO CLEAN-UP. USE CONDUCTIVE GROUNDED CONTAINERS WHEN
TRANSFERRING. LARGE WATER: FLUSH W/COPIOUS AMOUNTS OF WATER. (SEE
SUPP)

Handling and Storage Precautions:STORE IN APPROVED STORAGE MAGAZINES
ONLY. KEEP PRODUCT COOL & DRY IN STORAGE.
Other Precautions:STORAGE & HANDLING MUST CONFORM TO APPROPRIATE
QUANTITY/DISTANCE REQUIREMENTS, BARRICADING, GROUNDING & PERSONNEL
MATERIAL LIMITS. HANDLING & USE OF EXPLOSIVES MUST BE LIMITED TO
PERSONNEL WHO ARE AUT HORIZED & TRAINED IN THIS AREA.

Respiratory Protection:USE A NIOSH/MSHA APPROVED RESPIRATOR IF EXPOSED
TO PARTICULATE MATTER. USE A NIOSH/MSHA APPROVED RESPIRATOR FOR
PROTECTION AGAINST TOXIC GASEOUS IGNITION BYPRODUCTS.
Ventilation:MECHANICAL (GENERAL): MODERATE FLOW IS RECOMMENDED.
EXPLOSION-PROOF EQUIPMENT REQUIRED.
Protective Gloves:IMPERVIOUS, STATIC DISSIPATING
Eye Protection:INDUSTRIAL SAFETY GLASSES/GOGGLES
Other Protective Equipment:100% COTTON UNDERWEAR & FLAME-RESISTANT FULL
BODY COVERALLS, CONDUCTIVE SHOES , SAFETY SHOWER, EYE WASH/LAUNDRY
FACILITY
Supplemental Safety and Health
SPILL PROC CONT'D: COLLECT WATER TO DISPOSE FF AS HAZARDOUS WASTE. IF
PRODUCT SEAL RUPTURES, BARRICADE AREA & ELIMINATE IGNITION SOURCES.
LARGE SOIL: REMOVE TO DISPOSE AS HAZARDOUS WASTE. DEMPOSITION TEMP
DATA IS FOR THE POLYMER COMPONENT IN THIS PRODUCT.

Decomp Temp:Decomp Text:400F (SUPP)
Spec Gravity:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:METALLIC ORDNANCE HARDWARE, SOLID W/NO ODOR

Stability Indicator/Materials to Avoid:YES
PRODUCT IS SEALED, IF SEAL RUPTURES, REMOVE ALL OTHER HAZARDOUS
MATERIALS.
Stability Condition to Avoid:SHOCK, IMPACT, FRICTION, ELECTROSTATIC
DISCHARGE, HIGH PRESSURE, HIGH TEMP, OPEN FLAME
Hazardous Decomposition Products:LEAD/ZIRCONIUM & FLUORINE COMPOUNDS,
HYDROGEN FLUORIDE GAS, POTASSIUM CHLORIDE DUST

Waste Disposal Methods:EXPLOSIVES/RELATED DANGEROUS MATERIAL SHOULD BE
DESTROYED BY OPEN BURNING/OPEN DETONATION IN AN APPROVED
INCINERATOR/BY APPROVED CHEMICAL TREATMENT/DESTRUCTION IN
ACCORDANCE W/LOCAL, STATE & FEDERAL R EGULATIONS. RCRA HAZARDOUS
WASTE D003/D008.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.